Skip to main content
Connecting devices to your Smart Hub 2 | BT Business
Help & Support Banner

Your BT Business Smart Hub 2 guide

Find our tips to get the most from your BT Business Smart Hub 2, from setting it up to fixing problems, you’re in the right place.

What do you need help with?

What do you want help with?

Connecting devices to your Smart Hub 2


To connect to your Hub wirelessly, you'll need the Hub’s wireless network name and password. They're on the back of the Hub.

The Hub’s wireless name will be something like BTB-ABCD.

  • Select your Hub’s wireless network name from the list of network connections shown on the device that you want to connect.
  • Enter the password when prompted.

Or, if your device supports WPS, you can just press the WPS button on your Hub to connect without using a password.


If your device has an Ethernet port, you can use the Ethernet cable (yellow ends) instead of wireless.

  • Plug it into one of the four yellow Ethernet ports on the back of your hub.
  • Connect the other end to the Ethernet port on your device.
Did this help?

Additional support