Skip to main content
Connecting devices to your Smart Hub 2 | BT Business

Connecting devices to your Smart Hub 2


To connect to your Hub wirelessly, you'll need the Hub’s wireless network name and password. They're on the back of the Hub.

The Hub’s wireless name will be something like BTB-ABCD.

  • Select your Hub’s wireless network name from the list of network connections shown on the device that you want to connect.
  • Enter the password when prompted.

Or, if your device supports WPS, you can just press the WPS button on your Hub to connect without using a password.


If your device has an Ethernet port, you can use the Ethernet cable (yellow ends) instead of wireless.

  • Plug it into one of the four yellow Ethernet ports on the back of your hub.
  • Connect the other end to the Ethernet port on your device.
Did this help?

Additional support